On Center Home | MyOnCenter Portal | Start an On-Screen Takeoff Trial | Request a Quick Bid Demo | Contact Us | SALES: 1-866-627-6246
   
 
Learn more about Searching
Looking for help for one of ConstructConnect's Other products? Login


Tools
Table of Contents

06 Setting Scale and Drawing Takeoff (including Takeoff Boost™)

1 On-Screen Takeoff - 06.01.02 Calculating the Scale of a Plan Using a Known Linear - OST

If there is no scale present on an image/plan or if the scale indicated is…

2 On-Screen Takeoff - 06.01.03 Verifying the Scale of a Plan - OST

After you've set (or calculated) the scale for a Page, you must verify, or…

3 On-Screen Takeoff - 06.04.02 Adding a "Drop-Run" Adjustment to Linear Takeoff - OST

A Drop/Run accounts for additional material needed when taking off objects…

4 On-Screen Takeoff - 06.04.03 Manually Setting the Length of Linear Takeoff - OST

You can manually set the length of any linear object. There are two ways you…

5 OST - 06.00 - Scale and Takeoff Overview

Now, we come to the real reason you're using On-Screen Takeoff, measuring (taking…

6 OST - 06.01 What is Scale and Why is it so Important?

After you add your plans to a project, or create blank pages to use with a…

7 OST - 06.01.01 Setting the Scale of a Plan

There are several ways to set the Scale of a Page. Setting Scale on the Cover…

8 OST - 06.02 Drawing Takeoff (aka "taking off plans", aka "quantity surveying", aka "measuring")

Drawing Takeoff, "taking off a project", or "quantity surveying" is the process…

9 OST - 06.02.01 - Using Takeoff Boost™ to Get a Head Start on Your Project - Overview and Requirements

Note The information below applies to the version 3.98.10.49 (and newer). All…

10 OST - 06.02.02 - Running Takeoff Boost™

Note The information below applies to the latest version of On-Screen Takeoff,…

11 OST - 06.02.03 - Takeoff Boost Results (Conditions and Takeoff)

As mentioned in the previous article, when Takeoff Boostâ„¢ returns results,…

12 OST - 06.02.04 - Reviewing Takeoff Boost Results and Deleting What's Not Needed

After Takeoff Boost returns results to On-Screen Takeoff, the first thing you'll…

13 OST - 06.02.05 - Editing and Moving Boost Conditions

After Takeoff Boost returns results to On-Screen Takeoff, you: Review them…

14 OST - 06.02.06 - Reassigning Boost Takeoff to Your Own Conditions

After Takeoff Boost returns results to On-Screen Takeoff, you: Review them…

15 OST - 06.02.07 - Adjusting and Correcting Takeoff Boost Results

After Takeoff Boost returns results to On-Screen Takeoff, you: Review the Conditions…

16 OST - 06.02.08 - Filling in the Gaps - Adding Manual Takeoff after Running Boost

After Takeoff Boost returns results to On-Screen Takeoff, you: Review them…

17 OST - 06.02.09 - Rerunning Boost on a Page

Note Re-running Takeoff Boost will not produce different Results. Notice in…

18 OST - 06.03 Multi-Condition Takeoff (Patented)

We go to great lengths to make measuring your plans simple and efficient, and…

19 OST - 06.04 Drawing Linear Takeoff (Using a Linear Condition to Measure Walls, Gutters, Pipes, Wiring, etc.)

Linear takeoff is anything measured with a line (even a curved line) with results…

20 OST - 06.04.01 Drawing Arcs (Curved Linear Segments)

On-Screen Takeoff makes it easy to create arcs or "curved linear segments".…

1 2 Next

Product documentation (user guides) describes functionality in the latest version of each major release and may not match the functionality in the version you are using. Please check the Product Information and Downloads pages by clicking one of the product buttons above.

Something Wrong with this Article? Let us Know! The information in this site is protected by copyright by ConstructConnect. You may not reproduce, adapt, or publish any content from this site in whole or in part for any purpose, without the express written consent of ConstructConnect, Inc.
Copyright 2024 - All Rights Reserved.