On Center Home | MyOnCenter Portal | Start an On-Screen Takeoff Trial | Request a Quick Bid Demo | Contact Us | SALES: 1-866-627-6246
   
 
Learn more about Searching
Looking for help for one of ConstructConnect's Other products? Login


Tools
Table of Contents

OST - 06.01.02 Calculating the Scale of a Plan Using a Known Linear

Views: 1466 Last Updated: 11/03/2022 02:17 pm 0 Rating/ Voters
Be sure to rate this article 5 Stars if you find it helpful!

If there is no scale present on an image/plan or if the scale indicated is not correct when you try to verify it (next article), On-Screen Takeoff can Calculate Scale based off some marked linear on the drawing.

Caution

We do not recommend changing the scale of a page after you have drawn takeoff because On-Screen Takeoff may not be able to resize all takeoff correctly. The new scale may cause some takeoff to extend outside the page or it may objects may not be able to resize because of related or connected objects. It is vital that you set/calculate and verify scale before drawing takeoff.

When working on a bid that includes child bids, you are prevented from changing the scale if the program identifies that there is takeoff on this Page in a child bid (or the base bid if you are in a child bid).

Cannot change scale because there is takeoff in a related bid

To Calculate Scale (Using a Known Linear)

On the Image Tab, locate and zoom into a line on the drawing that is labeled with its dimension (a "known linear"). We recommend using the longest known linear on a project plan possible to calculate the most accurate scale.

ALT TEXT

Click Edit > Calculate Scale - the Calculate Scale dialog opens.

ALT TEXT

Select a Scale Style (Architectural, Civil or Metric)

Enter the length of the known linear object, as displayed on the image

For Imperial measurements, the quantities are entered in feet and inches

  • For 25', enter "2500", which is 25 feet, 00 inches
  • For 100' 6", enter "10006", which is 100 feet, 06 inches

For Metric measurements, the quantity is entered in millimeters

  • For 1 meter, enter "1000"
  • For 25 meters, enter "25000"

While the Calculate Scale window is still open, click the starting point for the known linear, hold down the mouse button, and draw to the ending point. A red line, labeled with the dimension entered for the known length, traces your movements.

Note
Notice this drawn line does not show the fractional dimension - the drawn line's label is rounded up to the nearest whole inch but the calculations are based on what is entered in the measure box

The scale automatically adjusts in the Calculate Scale window which may not match the scale indicated on the drawing (it may be only fractionally different).

ALT TEXT

Click the "Apply to all Pages" option if you know that this is the scale for all Pages in your Project (but be sure to verify scale on each page before drawing any takeoff).

Click OK to accept the new scale. Before you go any further, though, double-check your Scale.

click here to view the previous article Setting Scale Verifying Scale click here to view the next article



Product documentation (user guides) describes functionality in the latest version of each major release and may not match the functionality in the version you are using. Please check the Product Information and Downloads pages by clicking one of the product buttons above.

Something Wrong with this Article? Let us Know! The information in this site is protected by copyright by ConstructConnect. You may not reproduce, adapt, or publish any content from this site in whole or in part for any purpose, without the express written consent of ConstructConnect, Inc.
Copyright 2024 - All Rights Reserved.