OST - 06.02.09 - Rerunning Boost on a Page

Running Takeoff Boost on a Page with existing Takeoff Boost takeoff

Effective with the 3.98.13.03 release (and newer), you may be able to re-run Takeoff Boost on a Page on which you have already run it, if you select different Condition Results.

In the Takeoff Boost dialog box, simply uncheck any Results already delivered by the service and then click "Run Takeoff Boost".

If you attempt to run Takeoff Boost on a Page on which you've already run it for the selected Condition Results, (and you have not moved the Takeoff Boost Conditions out of the "Boost" folder), the following warning displays:

There are a few things to understand about re-running Boost:

• You can re-run Takeoff Boost if you select different Results from the previous time(s) you ran it.
• Example 1: the first time ran Takeoff Boost, we only selected "Walls". We can re-run it as long as we do not select "Walls" again. If you want to run it again with "Walls", you must move the Takeoff Boost Conditions out of the "Boost" folder, rename them, or delete all associated takeoff.
• So, the next time we run Takeoff Boost, we can select "Counts" (any combination).
• Example 2: let's say that we ran Takeoff Boost on Counts for Doors only. We can re-run Counts for Plumbing Fixtures and Other, but not for Doors.
• If you have not moved the Boost Conditions out of the Boost folder, and there is still takeoff associated with those Conditions on this Page, you must delete that takeoff before you can run Takeoff Boost.
• We do not recommend deleting Boost Conditions because you may have takeoff associated with them on other Pages in the Bid.
• Running Takeoff Boost on this Page does not affect other Pages except it re-creates any Boost Conditions you previously deleted that are required on this Page.
• If you have renamed Boost Conditions or deleted them, they will be re-added to the Project, but only this Page will have new Boost takeoff on it.
• If you name a Condition "Boost Footprint Area", "Boost Gross Area", "Boost Net Area", or any possible Boost result, and draw takeoff with it on the current Page, you must delete that takeoff or rename the Condition(s) first.
• Takeoff Boost sees Conditions with "Boost" in them as its own (see Boost Conditions and Takeoff (Boost Results) for a comprehensive list of Boost Conditions).
• If you move the Boost Conditions out of the Takeoff Boost folder, you still must delete any takeoff on this Page associated with those Conditions to re-run Takeoff Boost.
• The folder location of the Boost Conditions does not affect Takeoff Boost identifying them, it's the name of the Condition that matters.
• If you have gone through the process of renaming Conditions and reassigning takeoff and re-run Takeoff Boost, you very possibly will duplicate takeoff.

If you have reassigned and/or renamed Conditions/takeoff on this Page (so that there is no takeoff associated with any "Boost" named Condition,) you can proceed with re-running Takeoff Boost.

Filling in the Gaps - Adding Manual Takeoff

Multi-Condition Takeoff (Patented)