|
|
On-Screen Takeoff - 01.03.05 How to Enter Values into Measurement Boxes
Views: 2102 Last Updated: 07/29/2024 07:32 am |
0 Rating/ 1 Voters
|
|
Be sure to rate this article 5 Stars if you find it helpful! |
When you are presented with a measurement box, you need to tell On-Screen Takeoff some information so it can properly calculate takeoff quantities. For example, when setting up a Linear Condition, you need to tell the program how tall (Height) the wall is so it can tell you the surface area. To calculate Volume (on a Linear) you'd also have to specify Width (L x W x H = V).
Imperial (U.S. Standard)
When entering a quantity in any Imperial measurement box, the last two digits typed are always interpreted as inches and are always converted to feet.
Examples:
- "8" is 8 inches, not 8 feet
- "800" is 8 feet 0 inches or 8' even
- "824" is interpreted as 8 feet, 24 inches, or 10' 0"
- to set a measurement to 824 inches, you'd have to convert it to feet/inches first, so you'd enter 6808 (68' 08")
- "10" is 10 inches, not 10 feet
- "1000" is 10 feet 0 inches or 10' even
- "1010" is 10' 10"
System International (Metric)
When entering a quantity in any Metric measurement box, the value is always entered as millimeters.
Examples
- To enter 1.2 meters into a measurement box, type "1200"
- 10 cm is entered as "100" (100 mm = 10 cm)
If you are having problems getting On-Screen Takeoff to display quantities of 1,000 or more in a metric database or bid, see Related Articles for troubleshooting.
You can specify fractions of an inch or millimeter by entering a decimal.
|
|