What Digitizer Driver Do I Use?
Different versions of On-Screen Takeoff support different drivers and versions of those drivers.
Below is a matrix that shows which versions of which drivers are supported with each major version of On-Screen Takeoff.
|
On-Screen Takeoff Version |
TabletWorks |
VTablet Interface |
|
2.7 |
7.4 *** |
3.2 |
|
3.0 |
7.4 *** |
3.2 |
|
3.1 |
7.4 *** |
3.2 |
|
3.2 |
7.4 *** |
3.2 |
|
3.3 |
10.0.3 and newer |
3.2 |
|
3.4 |
10.0.3 and newer |
3.2 |
|
3.5 |
10.0.3 and newer |
3.2 |
|
3.6 |
10.0.3 and newer |
3.2 |
|
3.7 |
10.0.3 and newer |
3.2 |
Although the TabletWorks 7.4 driver works with earlier versions of On-Screen Takeoff, On Center Software cannot distribute this driver and the Virtual Tablet Interface (VTablet) driver must be used. If you have access to an old On Center Software CD that includes TabletWorks 7.4, you may install the driver from that CD.
Starting with On-Screen Takeoff version 3.3.0, On Center Software distributed TabletWorks 10. Users may continue to use the VTablet Interface but it can be replaced with TW10. On Center Software does not provide support for the VTablet Interface, it is a third party driver provided by www.vtablet.com.
 |
NOTE: Download the latest GTCO digitizer drivers from www.oncenter.com/support |
 |
Additional Information:
See the FAQ Troubleshooting your GTCO Digitizer for more help with your digitizer.
If you are installing your digitizer in a Citrix environment, see Citrix and Digitizers. |
