|
|
On-Screen Takeoff Takeoff Boost™ Service Update Release Notes (2025-03-21) - OST DPC
Views: 145 Last Updated: 03/18/2025 07:37 am |
100 Rating/ 1 Voters
|
   
|
Be sure to rate this article 5 Stars if you find it helpful! |
Improvements
- Takeoff Boostâ„¢ now more accurately draws:
- Short walls segments (think the sidewalls of closets)
- Connecting Walls
Why is this a big deal?
Before this update, Takeoff Boostâ„¢ often missed short walls that connected two longer wall segments. Now, you won't have to go back and takeoff all these short segments yourself - saving you time and frustration.
This release improves "short" and "connecting" wall detection, but you, as the estimator, still need to double-check the takeoff results.
Examples
Please note the before and after results below.
Before |
After |

Notice, the short segments along the bottom of this room were not taken off. |
 After the update, the missed walls are taken off (and, with the previous update, are now centered on the walls.) Notice, that the segment on the left needs minor adjustment to match the plan. |
 Again, the short sections of wall were missed. |

The short wall sections are taken off (and now aligns with the plan accurately). |
 Notice, the short walls were missed (and the center line was not aligned to the plan).
|
 After the update, the walls are drawn more correctly, although, you can see, Takeoff Boost missed a short segment on the right side. |
 Notice the boxed areas, Takeoff Boost missed a few walls. |
 After the update, Takeoff Boost corrected identified those missing walls. |
 Before the update. |
 After the update. |
|
|