The Image Tab is where a Foreman does most of his work in DPC. The screen may look a little complex at first, but each section is explained in detail below.

There are several key areas to the Image Tab:

• Tools and Controls (the toolbars)
• Image (and takeoff objects)
• Labor Cost Codes (LCCs) window (Cost Code List)
• Production Window
• Percenting Slider and the Set % Context control
• Layers management tab
• Status Bar

This screen shot below is a little busy, but there's a lot of information being presented on the Image Tab. Don't be intimidated, this screen will soon become second-nature to you, after you learn how to use it.

Image Window

The Image window is where the project plans and takeoff objects are displayed. Objects on the images are color-coded and shaded to give a visual reference of their status:

• Blue objects have not yet been percented nor had time applied to them
• Green objects are on or under budget
• Orange objects are less than 5% over budget
• Red objects are 5% or more over budget
• Hatched objects are incomplete (greater than 0%, but less than 100% complete)
• Solid objects are 100% complete

Bid View, Labor Cost Codes, Layers Window

This window displays the Bid View, Labor Cost Codes, and Layers lists. By default, this window opens to the Labor Cost Code list.

The Labor Cost Code Tab

The Labor Cost Code list displays all cost codes associated with the takeoff objects on the current page. The Labor Cost Code window may be grouped and sorted to make it easier to use (see Context Menu, below for additional information).

The LCC list displays a lot of information...

Bolded Cost Codes

Indicates the LCC was used more than once in a single Condition in Quick Bid and is being percented based on the Qty 1 UOM. For example, in the screen shot above, "FRM WALL (LF)" is bolded, this means that it was used more than once in a single Condition:

Whether or not the Item's quantity was LF or SF, the Production would be calculated based on LF (the Condition Quantity 1) and displayed as LF in Digital Production Control.

Color Coding and Shape

• Blue objects have not yet been percented or had time applied to them
• Green objects are on or under budget
• Orange objects are less than 5% over budget
• Red objects are 5% or more over budget

This is based on the overall Project % complete for each Labor Cost Code.

% (complete)

Indicates the % Complete for each LCC for the current page only

the LCC window Control Buttons

By Default, the Labor Cost Code window is located on the right side of Digital Production Control, change this by clicking Tools > Options > DPC > Toolbars, specify whether to Lock the DPC toolbars here as well (this is especially helpful for tablet users - it keeps them from accidentally moving a toolbar).

The Percent Complete buttons, are located at the bottom of the Labor Cost Code (LCC) list.

Button	What it does/How it is used...
	Multi-select toggle. When using a Tablet PC (with only an on screen keyboard), this toggle allows you to check/uncheck Labor Costs Codes for multi-percenting. (Percenting is discussed in Related articles.)
	Selects all takeoff objects for the selected LCC, on the current page, set to zero (0) percent complete (not started).
	Selects all takeoff objects for the selected LCC, on the current page, that are greater than zero (0) percent complete but less than 100 percent complete. Basically selects everything that already has a percent set but that is not completed.
	Selects all takeoff objects for the selected LCC, on the current page, set to (100%) complete.
	Hides all takeoff objects for the selected LCC, on the current page, set to (100%) complete (cleans up the Image window significantly as your project progresses).
	Returns the bid to Takeoff (TKO) Mode. Project Managers can edit takeoff quantities and pricing. Foremen can view the colored takeoff for the project in Read Only mode. All users can access the Quick Takeoff (Measurement) Tools and Annotations in Takeoff Mode.

Labor Cost Codes Window Context Menu

Bid View Tab

The Bid View list allows you to switch between the Base Bid or an accepted Change Order (this function is also available via the Bid View drop down on the Main toolbar).

The Image, Budget, Timecard, and Payroll Recap screens all show specific information for the Bid View selected in this tab.

Layers Tab

The Layers list displays the list of layers that are used on the selected page. There are two buttons located at the bottom of this window, Check All and Check None used to show/hide all layers at one time. Individually click each check box located to the left of the listed Layer in the Show column to selectively show/hide layers.

Production Window

The Production Quick View window located below the Labor Cost Code window, displays a quick snapshot of production status for the overall Bid in Days. To activate the Production Window, click View > Production Window.

The Percenting Slider

The Percenting Slider is located at the bottom of the Image window and provides an easy tool to set percent complete (in single percent increments) for selected objects. See Related articles for more details on setting percents.

The Status Bar

The Status bar, located at the bottom of screen, provides the date, current page, budgeted (B:) and remaining (R:) labor hours for the selected takeoff objects, Architectural page size, and current features for which you are licensed. This gives the user a quick reference at a glance. In DPC Mode, the Status Bar cannot be disabled.

The Bids Tab

The Budget Tab