Symptom

Using the Digital Takeoff Table (original or II) with a Matrox TripleHead2Go device may result in some monitors not functioning correctly.

Cause

Matrox TripleHead2Go is a multi-display device that allows three monitors to display over a single video output. The Digital Takeoff Table will not work properly if connected directly to the Matrox device. Two video outputs from the main computer are required.

Using this configuration, the monitors connected to the Matrox device may not show video on all three screens.

Resolution

To resolve this issue, ensure your Digital Takeoff Table is connected to the computer directly, not to the Matrix device.